PA-2 / PA2-Gold
Hg analyzer aqueous solutions, Hg analyzer water, mercury analyzer aqueous solutions, mercury analyzer process applications, Mercury analyzer water
MERCURY ANALYZER FOR WATER AND AQUEOUS SOLUTIONS IN PROCESS APPLICATIONS
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. The PA-2 was specially designed for process analysis and operation under harsh industrial condition. The system comes with either the VM-3000 or the UT-3000 photometer to meet different requirements regarding accuracy and sensitivity of measurements.
DOWNLOADS
FEATURES AND BENEFITS
- Fully automatic system
- Easy menu-driven operation
- Proven and reliable detection method: AAS
- Measuring ranges from 10 ppt to 100 ppm
- High flexibility of sample pretreatment
- Suited for complex sample compositions
- Low reagent consumption
- Corrosion-protected construction
- Automatic self diagnosis system for reliable operation
MAIN APPLICATIONS
- Quality control in chlorine-alkali plants
- Monitoring of scrubber water of waste incinerators and power plants
- Control of industrial sewage
- Control of purification plants
- Quality control of sulphuric acid
- Quality control of drinking water
TECHNICAL INFORMATION
Amalgamation on MI GoldTrap (PA-2 Gold only), cold vapor atomic absorption (CVAAS) at 253.7 nm
Electrodeless low pressure mercury lamp (EDL)
Reference beam method
Fused silica (Suprasil), lapprox. 230mm, heated approx. 55°
0.1 … 1 µg/l to 0…10 mg/l
0.01 … 1 μg/l to 0.1 … 10 μg/l
> 0.01 µg/l
approx. 1 minute
approx. 20 l/h
compressed air, filtered, approx. 30l/h, 1bar
Tin-II-chloride or Sodiumhydroborate
approx. 3l/week for each reagent
HCl or H2SO4, KMnO4 or H2O2 or Fenton’s Reagent or NaClO3; depending on sample composition
analogue: 4 – 20 mA (500 Ω max.);
serial: RS232 / USB/td >
Calibration; Autozero; Service; Malfunction; according to NAMUR 64 recommendations
Fibreglass-reinforced polyester, for use in highly corrosive environment – Reagent storage cabinet made of chemically resistent plastic material/td >
IP 66 (EN 60529/ NEMA 3; 3R; 4; 4X; 12; 13)
0 to 40°C
65°C
230 VAC / 50 Hz (110 VAC / 60 Hz option)
750 VA max. (PA-2 Gold, heating peak)
62 x 78 x 33 cm
approx. 50 kg
