𝘋𝘺𝘯𝘢𝘮𝘪𝘤𝘖𝘱𝘢𝘤𝘪𝘵𝘺™ Dust Monitor
VIEW 580
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems
- Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications
- Advanced sensor design includes automatic drift (zero and span) checks
Resistant to contamination, operational with optics 90% contaminated
- Simple installation, set-up and maintenance
- External display and keyboard for easy set up
- Can be purged with instrument air providing lower cost of ownership; blowers available if preferred
- Lower levels of maintenance than traditional Opacity systems
- mg/m³ output, once calibrated.
- Stacks after Electrostatic precipitators, bag filters, cartridge filters, cyclones, or no filter
- Non-condensing / dry flue gases
- Variable flue gas velocities, including low velocity flue gase
- Typical Applications:
- Incineration
- Metals e.g. Steel/Aluminium
- Minerals e.g. Cement
- Power e.g. Boilers/Biomass
| Technical Specifications | |
|---|---|
| Measured parameters | Dust |
| Technology | DynamicOpacity™ |
| Measurement/Monitoring capability | 0-1000 mg/m3* |
| Stack/Duct diameter suitability | up to 8m |
| Flue gas temperature | up to 400°C |
| Baghouse | YES |
| Cartridge Filter | / |
| Ceramic Filter | / |
| Coalescent Filter | / |
| Cyclone | YES |
| Electrostatic Precipitator (ESP) | YES |
| Wet Electrostatic Precipitator (WESP) | / |
| Wet Scrubber | / |
| Sensor variants | Stainless Steel |
| QA checks | N/A |
Application dependant
| Technical data | |
|---|---|
| Monitoring capability | 0-1000 mg/m3 |
| Stack Temperature Ranges | 0-250°C standard up to 400°C option |
| Outputs | RS232, RS485 (Modbus), 2 x Relay Alarms, 1 x 4/20mA |
