ENVEA logo - Click to visit homepage
CONTACT US
Home > Product > STACK 980

STACK 980

, ,

𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ Approved Particulate CEM

MCERTS EN 15859 Filter Dust Approved Particulate monitoring system providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters

CONTACT US

DOWNLOADS

FEATURES AND BENEFITS

  • Robust design unaffected by product build-up on the sensor rod
  • No additional services such as air purge required, providing lower cost of ownership
  • Simple maintenance no requirement for specialist service personnel
  • Networking of sensor channels and providing multiple inputs and outputs for external connections
  • Extensively used for measurement (mg/m3) and leak location in bag filter stack applications
  • Advanced sensor design includes drift checks (zero and span) and contamination checks
  • Passive/Active and fully insulated sensor options available for applications with stack condensation and damp particulate prevents potential short circuit to stack wall
 
 

MAIN APPLICATIONS

  • Stacks after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
  • Non-condensing / dry flue gases
  • Variable velocities within range 8 – 20 m/s (typical bag filter velocity ranges), constant velocity required outside this range
  • After process dryers

 

Typical Applications:

  • Incineration
  • Metals (eg Steel/Aluminium)
  • Minerals (eg Cement/Gypsum)
  • Chemicals (eg Detergent / Carbon Black)
  • Power Generation Plant (eg Coal/Biomass)

TECHNICAL INFORMATION

Measured parameters

Dust

Technology

ElectroDynamic™ Advanced Probe Electrification

Measurement / Monitoring capability

0-1000 mg/m3*

Stack / Duct diameter suitability

up to 8m

Flue gas temperature

up to 800°C

Baghouse

YES

Cartridge Filter

YES

Ceramic Filter

YES

Coalescent Filter

YES

Cyclone

YES

Electrostatic Precipitator (ESP)

/

Wet Electrostatic Precipitator (WESP)

/

Wet Scrubber

/

Sensor variants

Stainless Steel, Fully insulted PTFE coated, Passive/Active

QA checks

YES

Measurement capability

0 – 1000 mg/m3

Sensor Variants

316 Stainless Steel / Fully insulated PTFE coated (option) / Passive/Active (option)

Stack Temperature Ranges

0 -250°C up to 800°C (option)

Functionality and QA Checks

Automatic zero and span / Short circuit check / Contamination check / Drift checks

Data output

RS485 (Modbus) output to Controller

Air purge

option

Enclosure Protection Rating

IP66

APPROVALS & CERTIFICATIONS

Certified

  • MCERTs certified to EN15859 (Filter Dust monitor)
  • EX Zone 2, 20
  • US EPA MACT Compliant BLD

CUSTOMER STORIES

MORE CASE STUDIES

RELATED PRODUCTS

QAL 991

𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ QAL1 Approved Particulate CEM

LEARN MORE

MORE PRODUCTS